[clug-talk] Need drivers
gustin at echostar.ca
Mon May 31 12:03:12 PDT 2010
On 10-05-30 06:01 PM, Joseph Shuttleworth wrote:
> ----- Original Message -----
> From: Mark Carlson <carlsonmark at gmail.com>
> Date: Sunday, May 30, 2010 4:59 pm
> Subject: Re: [clug-talk] Need drivers
> To: CLUG General <clug-talk at clug.ca>
>> Interesting. Do you know which cards eth0 and eth3 belong
>> to? It may
>> be in your boot log, or the output of 'dmesg'.
> I'm not sure. I checked the log and dmesg, but I looks confusing. Linux
> changes the order
> of eth at times. When I use ethtool eth3 was the only one I could get
> info on and I have
> the modem connected to the Macronix card if that helps.
Most modern distros have a mapping of MAC address to device name.
Usually something like /etc/udev/rules.d/70-persistent-net.rules
Since two interfaces are shown it may be that only one interface is
configured for dhcp and it is not the one connected to the modem. Try
What distro are you using?
>> Also, do you know if your network cards work in this configuration
>> when you are using another OS?
> I have XP on another partition and it works with the Macronix card.
Run the following command from a terminal. Do it a second time and
replace eth0 with eth3.
grep eth0 /var/log/dmesg
Here is what I get on my laptop.
[ 1.032604] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
[ 1.032606] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.032630] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1004ff-0ff
[ 17.960553] ADDRCONF(NETDEV_UP): eth0: link is not ready
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 262 bytes
Desc: OpenPGP digital signature
More information about the clug-talk