[clug-talk] addition to the Atmel Butterfly

Mark Carlson carlsonmark at gmail.com
Thu Dec 13 08:10:21 PST 2007

On 12/13/07, Robert Lewko <lewkor at gmail.com> wrote:
> Mark, I just wanted to show you this:
>  http://ecrostech.com/AtmelAvr/Butterfly/index.htm
>  Some people may want to have the options that this, reasonably priced,
> board gives - here's a list:
> an external power source using almost any DC wall-wart
> an external power source using a battery
> a power indicator LED
> enough power for your own additional circuits
> a serial 6-pin in-system programming header located at the rear of the
> assembly
> a 10-pin JTAG in-circuit emulation (ICE) header located at the rear of the
> assembly
> a DB9 connector on the left for a serial interface cable
> a reset button on the right hand side
> more than six square inches of prototyping area at the front
> all interfaces brought to the edge of the prototyping area for easy access
> an oscilloscope or multi-meter ground pin

Cool, looks like a nice, cheap add-on for the butterfly.

More information about the clug-talk mailing list