[clug-talk] addition to the Atmel Butterfly

Robert Lewko lewkor at gmail.com
Wed Dec 12 23:14:26 PST 2007


Mark, I just wanted to show you this:
http://ecrostech.com/AtmelAvr/Butterfly/index.htm

Some people may want to have the options that this, reasonably priced, board
gives - here's a list:


   - an external power source using almost any DC wall-wart
   - an external power source using a battery
   - a power indicator LED
   - enough power for your own additional circuits
   - a serial 6-pin in-system programming header located at the rear of
   the assembly
   - a 10-pin JTAG in-circuit emulation (ICE) header located at the rear
   of the assembly
   - a DB9 connector on the left for a serial interface cable
   - a reset button on the right hand side
   - more than six square inches of prototyping area at the front
   - all interfaces brought to the edge of the prototyping area for easy
   access
   - an oscilloscope or multi-meter ground pin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://clug.ca/pipermail/clug-talk_clug.ca/attachments/20071213/d7407c6f/attachment.html 


More information about the clug-talk mailing list