[clug-talk] configure printer

Gustin Johnson gustin at echostar.ca
Sun May 28 22:26:54 PDT 2006


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

There does not seem to be a problem here.  This looks almost identical
to my cups log file, and my cups is working great.

Do you get any errors when you try to print?

Michael Walters wrote:
> Hello Gustin,
> 
> I did as you suggested and did a tail -n60 /var/cups/error_log
> as super user using tab completion where applicable and got the 
> following results:
> 
> I [28/May/2006:18:35:07 -0600] Full reload is required.
> I [28/May/2006:18:35:09 -0600] Load PPDs:Read "/var/lib/cups/ppds.dat", 
> 2517 PPDs...
> I [28/May/2006:18:35:10 -0600] Load PPDs: No new or changed PPDs ...
> I [28/May/2006:18:35:11 -0600] Full reload complete
> I [28/May/2006:20:01:34 -0600] Scheduler shutting down normally
> I [28/May/2006:20:59:11 -0600] Loaded configuration file 
> "/etc/cups/cupsd.config"
> I [28/May/2006:20:59:11 -0600] Configured for up to 100 clients
> I [28/May/2006:20:59:11 -0600] Allowing up to 100 client connections per 
> host
> I [28/May/2006:20:59:11 -0600] Full reload is required
> I [28/May/2006:20:59:13 -0600] Load PPDs:Read "/var/lib/cups/ppds.dat", 
> 2512 PPDs...
> I [28/May/2006:20:59:14 -0600] Load  PPDs: No new or changed PPD's...
> I [28/May/2006:20:59:15 -0600] Full reload complete
> I [28/May/2006:21:14:23 -0600] Adding start banner page "none" to job 382
> I [28/May/2006:21:14:23 -0600] Adding end banner page "none" to job 382
> I [28/May/2006:21:14:23 -0600] Job 382 qued on 'Canon BJ-2003' by 'michael'.
> I [28/May/2006:21:27:32 -0600] Scheduler shutting down normally.
> I [28/May/2006:21:27:32 -0600] Loaded configuration file 
> "/etc/cups/cupsd.config"
> I [28/May/2006:21:27:32 -0600] Configured for up to 100 clients
> I [28/May/2006:21:27:32 -0600] Allowing up to 100 clients to connect per 
> host.
> I [28/May/2006:21:27:32 -0600] Full reload is required.
> I [28/May/2006:21:27:33 -0600] Load PPDs: Read "/var/log/cups/ppds.dat", 
> 2517 PPDs...
> I [28/May/2006:21:27:34 -0600] Load PPDs: No new or changed PPDs...
> I [28/May/2006:21:27:34 -0600] Full reload complete
> 
> 
> Does this give you a clue as to what is going on Gustin?
> 
> All help appreciated in advance,
> 
> Michael Walters
> Gustin Johnson wrote:
> 
> 
> Michael Walters wrote:
>>>> Hello Gustin,
>>>>
>>>> I have highlighted in green among other things at /etc/init.d$
>>>> cupsys and cupsys.dpkg-new . Should I su and remove cupsys.dpkg-new and 
>>>> then run /etc.init.d/cupsys restart and then do a cat 
>>>> /var/log.cups/error_log to see the details of any errors just as you 
>>>> suggest? or should I just do /etc/init.d/cupsys restart exactly as you 
>>>> suggest without removeing cupsys.dpkg-new and then do a cat 
>>>> /var/log/cups/error_log to see the details of any errors exactly as you 
>>>> suggest?
>>>>
>>>> The reason I was thinking that I should remove cupsys.dpkg-new is that I 
>>>>   believe I got my printer problems running dkpg when I should not have.
>>>>
> The dpkg.new means that dpkg detected the new version is different from
> the old.  The dpkg.new file is not harming anything and can be kept as is.
> 
> Just run the existing file (since that is what is happening on boot) and
> post the output from the error log.  If it is really long (the log
> file), then tail -n60 /var/log/cups/error.log
> 
> 
>>>> Regards,
>>>>
>>>> Michael Walters
>>>> ______________________________________________
>>>> Gustin Johnson wrote:
>>>> bogi wrote:
>>>>>>> no.
>>>>>>> chkconfig --list and send the result in.
>>>> I don't think that this exists in a Debian based distro
>>>>
>>>>>>> Cheers
>>>>>>> Szemir
>>>>>>>
>>>>>>> On May 28, 2006 09:00, Michael Walters wrote:
>>>>>>>> Hello All,
>>>>>>>>
>>>>>>>> On boot up I noticed that the computer while trying to run the cups said
>>>>>>>> to correct the error by running /etc/rc5.d/h(something)
>>>>>>>>
>>>>>>>> And I have several choices for that something and perhaps a few other
>>>>>>>> things should be run too.
>>>>>>>>
>>>>>>>> run /etc/rc5.d/hddtemp   ??
>>>> This has nothing to do with cups
>>>>
>>>>>>>> run /etc/rc5.d/s20xprint ??
>>>> Should not be run directly.
>>>>
>>>>>>>> Since squid is not working either should I run
>>>>>>>> run/etc/rc5.d/s20squid  ??
>>>> Does squid need to be running?  It likely should not be running unless
>>>> one knows how to configure and lock it down.
>>>>
>>>>>>>> and should I run /etc/rd5.d/inetd ??
>>>> Not really related to cups either.
>>>>
>>>> Basically to run these scripts you look in /etc/init.d/
>>>>
>>>> So for me
>>>> /etc/init.d/cupsys restart
>>>> is how I restart the cups service.
>>>>
>>>> cat /var/log/cups/error_log
>>>> to see the details of any errors.
>>>>
>>>>>>>> All help appreciated in advance.
>>>>>>>>
>>>>>>>> I will check all the replies to this email for the next three days
>>>>>>>> before trying any of them to be safe from messing up my system.
>>>>>>>>
>>>>>>>> I messed up my system by trying a suggestion some people made without
>>>>>>>> checking it out first. That is how I lost printer configuration in the
>>>>>>>> first place.
>>>>>>>>
>>>>>>>> I was thinking of doing what was suggested at boot up, if I can get it
>>>>>>>> right.
>>>>>>>>
>>>>>>>> I would do the above as super user of course.
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks in advance,
>>>>>>>>
>>>>>>>> Michael Walters
> _____________
> 
>>
__________________________________________

> _______________________________________________
> clug-talk mailing list
> clug-talk at clug.ca
> http://clug.ca/mailman/listinfo/clug-talk_clug.ca
> Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
> **Please remove these lines when replying
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEeoYdwRXgH3rKGfMRAhmBAKCiNQjeG5OgY8wAr0UD91KPxwwIPgCgss6O
2AmlsCgYpAg7ts2sd35SBOQ=
=R0+y
-----END PGP SIGNATURE-----



More information about the clug-talk mailing list